Audio Terminal Box 5x for Shakers
Motion & Tactile · by Stuyo · 7 Jan 2026
Simple to print audio terminal box to go with the Dayton SAB-1060 10ch Sim Racing Amp .
PRO members get exclusive designs & early access$5/mo →
Overview
Simple to print audio terminal box to go with the Dayton SAB-1060 10ch Sim Racing Amp. It uses 4pin QR audio connectors and can hold up to 5 of them - perfect way to connect the 10 channels this amp has to you sim racing tactile setup. This splitter box will help you with cable management and maintenance.
Build info
Parts Needed:
1. Speaker connector set NL4FC 5x, assorted colors
2. Tapered M3x10mm screws to mount connectors to box, 10x
3. M3x16mm screws for the cover
4. M8 hardware for attachment to Alu profiles
Print Settings:
Parts oriented as should be printed, no supports needed. Use whatever settings you fancy.
Assembly:
Install Female terminals on box using the tapered screws, they go directly into plastic.
Solder all wires from the original harness by your choosing.
Cover can be placed either way based on your preference where the cable should exist. Screws directly in the plastic with M3x16 bolt.
Questions about this build?
Ask in the DIY-SIM Discord: other builders have probably built it already.
Ask on DiscordRelated builds
Motion & Tactile
Universal Pedal Mount for Bass Shakers
Short demo of all my iterations for mounting pedal bass shakers. Current setup is with the Heusinkveld Ultimates and Sim-Lab Inverted Mount.
7.8K views
Motion & Tactile
Dayton Puck T-Slot Mount
Dayton Puck mount for T-Slot Aluminum Extrusions. It allows easy mount to 8040 profile, has extended mounts to clear M6 screw heads.
7.7K views547 downloads
Motion & Tactile
Bass Shaker Mount 8040
Needed new way to mount my bass shakers to 8040 Aluminum Extrusion Profile on my sim rig and came up with this simple design. It is relatively fast to print and can fit small printer bed.
6.4K views433 downloads
Motion & Tactile
Seat Side Mount for Bass Shakers
Very simple project to mount full sized bass shakers on the side of virtually any side mounted seat. Using 4040 angle brackets provides enough adjustability as they have longer mounting hole.
5.3K views
Audio Terminal Box 5x for Shakers
Free