DIY-SIM
Pro · $15.00New0 views

57 Pedal Face Plates V2

Pedals · by Stuyo · 15 Nov 2026

Premium 3D-printable clutch, brake and throttle faces for the 57 Pedals: 9 mm thick, chamfered edges, a flush 57 logo and pedal symbol, and a silver band for a machined look straight off the printer.

$15.00one-off · instant download
Buy on Patreon

What you get

  • 57 Pedal Face Plates V2.zip95.3 MB
  • ✓ Parts list & print settings · ✓ Future updates
Builder members get this and the other Pro designs included, plus 30% off the shop$15/mo →

Overview

57 Pedal Face Plates V2 is a premium set of 3D-printable clutch, brake, and throttle faces designed to complement the 57 Pedals. Each plate is 9 mm thick, with chamfered edges, a flush 57 logo and pedal symbol, and a silver band for a machined look straight off the printer.

Fitment. All plates use a 14 mm mounting grid with countersunk holes for M6 screws. You can use them on other sim pedals with matching mounting spacing, or make a DIY adapter to suit your setup.

Choose the regular-size set or go larger with the Tall clutch and Wide throttle. Both sizes offer a regular-width brake or a wider Rally brake.

Eight face plates

  • Clutch (70 × 115 mm) and Clutch Tall (74 × 139 mm)
  • Brake (76 × 115 mm) and Brake Tall (76 × 143 mm)
  • Brake Rally (100 × 115 mm) and Brake Rally Tall (120 × 152 mm)
  • Throttle (70 × 186 mm) and Throttle Wide (84 × 186 mm)

What you get

  • Ready-to-slice 3MF projects with tested multi-colour settings
  • One-piece STLs for single-colour printing and separate black, silver, and inlay parts for multi-colour printing
  • STEP source files for CAD edits
  • A print guide with the tested settings

$15 one-time digital purchase. Pit Crew members pay $12, and free Patreon members pay $13.50 with their tier codes.

Builder members get this set as a gift. It’s included at no extra cost with our highest Patreon tier.

Build info

Tested multi-colour print on a FlashForge Creator 5 Pro (tool changer, 0.4 mm nozzles) in Bambu Studio. The 3MF projects carry all of these settings.

  • T1 green PETG: logo and pedal symbol (inlay part)
  • T2 black PETG: body (black part)
  • T3 silver PETG: colour band (silver part)
  • T4 PLA: support interface only, so the supports pop off cleanly
  • Print face down, as the files are oriented
  • Green first on the first layer (first layer filament sequence 1 2 3 4)
  • Tree supports (auto) with the PLA interface, prime tower on
  • 0.2 mm layers, 9 walls, 9 top / 9 bottom layers, 45 % gyroid infill

Single-colour printer: print the one-piece STL face down with the same profile. PETG is recommended.

Questions about this build?

Ask in the DIY-SIM Discord: other builders have probably built it already.

Ask on Discord

Related builds

57 Pedal Face Plates V2 - hero main

57 Pedal Face Plates V2

$15.00

Buy $15.00